JONSBO D32 PRO Black Tempered Glass M-ATX Gaming Case - Back Connector Support

"No Fan Included"

SPECIFICATION:

Model: D32 PRO
Case Material: SPCC Steel (0.7mm+0.8mm)
Motherboard Support:
Mini-ITX, Micro-ATX (Regular), and Micro-ATX (Back-Connect, chassis needs to be switched to B mode)
Drive Bay: 
Up to four 2.5-inch drives, or up to two 3.5-inch drives (shared with 2.5-inch mounts), depending on other hardware configurations
Front IO Port:
2x USB3.2 Gen1 Type-A
1x USB3.2 Gen 2 Type-C
1x Audio Combo
Fan Support:
Top supports 2x 120mm or 2x 140mm. Rear supports 1x 120mm. Bottom supports 3x 120mm or 2x 140mm (depends on other hardware configurations)
Radiator Support: Top up to 240mm
ATX PS2 PSU Clearance:
Maximum length is 150mm (recommended 140mm or less) when GPU is in the first PCI-E slot. Maximum length is 170mm (recommended 160mm or less) when GPU is in the second PCI-E slot.
If GPU length is 288mm or less and the power compartment partition is removed, PSU length is limited to 200mm. Exact mounting depends on motherboard specifications.
SFX PSU Support: SFX / SFX-L
CPU Air Cooler Clearance:
In A mode, height limit is 170mm for Intel or 169mm for AMD.
In B mode, height limit is 164mm for Intel or 163mm for AMD.
GPU Clearance: Up to 365mm
Dimensions without feet: 384mm x 207mm x 302mm (depth/width/height)
Dimensions with feet: 396mm x 207mm x 314mm (depth/width/height)

Full Description